Programming instructions

6.1.2
System Default
Description:
The system default sets the system configuration features to the default operating parameters.
When the system default is performed, certain programmed data, such as custom LCD messages
and system speed dial numbers, are lost.
Programming;
1. Press CONTROL T for main menu.
2. From main menu, select system and press ENTER.
3. From system menu, select defaults and press ENTER.
4. From defaults menu, select system and press ENTER.
5. Type y to confirm default or n to deny.
6.1.3 Class Of Service Default
Description:
There are 32 station class of service (COS) feature sets or grouping of features. Each set can
have differently configured features. This default programming returns one or all station COS
sets to the default configured parameters.
Programming:
1. Press CONTROL T for main menu.
2. From the main menu, select system and press ENTER.
3. From the system menu, select defaults and press ENTER.
4. From the defaults menu, select station COS and press ENTER.
5. Type l-32 to enter class of service to be defaulted. Enter the
numbers for the COS sets to be defaulted (n,n,nn) or enter a range of numbers (n-nn).
6.1.4
Station Default
Description:
Each station can have individually configured operating features. The station default sets the
configuration of these features to the default parameters.
Programming:
1~ Press CONTROL T for main menu.
2. From main menu, select system and press ENTER.
3. From system menu, select defaults and press ENTER.
4. From defaults menu, select stations and press ENTER.
5. Type intercom number or station name.
Sys tern Features Programming 6- 3