Programming instructions

/M/66-123
DXP PIus Programming Instructions
6.3.2
Message Deposit (Response Messaging)
Description:
This procedure enables a class of service messaging feature that allows station users to call an
LCD speakerphone and arrange for a message to be left on its display. The message is for the
called party to read if she or he is unable to answer the caller.
Refer to Section 6.3.1 for details
about programming the LCD messages that can be deposited. Also, you can use the procedure
detailed in Section 7.3 to assign a Response Message button to the telephone; however, users
can do this for themselves if they need the button.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS programming menu, type item number for feature and press ENTER.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each COS or press ESCAPE to end.
6.3.3
Message Waiting (Message Wait Originate)
Description:
When you enable this feature, a station user can dial a feature code to control the message
waiting light at another station.
Programming.= 1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS programming menu, type item number for feature and press ENTER.
6. Press SPACE bar for feature setting.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each COS or press ESCAPE to end.
Operation:
Turn message waiting light on: press INTERCOM, dial +k 3, dial extension number.
Turn message waiting light off: press INTERCOM, dial # 3, dial extension number.
6-6 Sys tern Fea tares Programming