Programming instructions

/M/66-123
DXP Plus Programming Instructions
6.5.3
SOHVA Groups
Description:
SOHVA calling groups control the pattern in which station ports receive and/or originate
SOHVA calls to one another. You must first form the SOHVA groups and then assign the
groups to individual stations.
Programming:
Form the SOHVA groups with this procedure.
1. Press CONTROL T for main menu.
2. From main menu, select system and press ENTER.
3. From system menu, select SOHVA table and press ENTER.
4. Type t, r, c to select transmit or receive group or to clear SOHVA table and press ENTER.
5. Type l-66 ENTER to select SOHVA group for programming.
6. Type SOHVA groups (1-16) to receive from or transmit to selected SOHVA group.
Enter the numbers for the groups to be assigned (n,n,nn) or enter a range of numbers
(for example, n-nn) to set.
7. Press ENTER and repeat steps 5 and 6.
8. When finished, press ESCAPE.
9. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
EXAMPLE: As illustrated in the following menu, programming action enables group 12 to
transmit to groups 3, 5 and 7. System default enables each group to transmit
and receive with itself and enables group 16 to transmit and receive with all groups.
SOHVA Receive
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1* ~ .~ . . . . . ..O .* .*
s 2.*............-*
0
3.. *.- 0.D *.-...* *
H
4...*.. . . ...* D ..*
V
5.. o ~ *..........*
A
6..... *..a . ..e ..*
7......*........*
T
a.. . ..." *.....- .*
r
9.. -..* *.*..-...*
a
10. . s . . . . * . * . . . . . *
n
11..........* - . ..*
S
12.. * .* .* . ...* . ..*
m
13............ * . . *
i
14...... o . . . 0 ..* * *
t
15..............**
16* 4 * k k * * ‘k k rt * ‘A * * * *
Use this procedure to assign stations to SOHVA groups.
1~ Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name and press ENTER.
5. Select SOHVA groups and press ENTER.
6. Type group number O-16 (n,n,nn or n-nn) and press ENTER.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each station or press ESCAPE to end.
6-12 System Features Programming