Programming instructions

DXP Plus Programming Instructions

lMl66-123

6.9.18

Day I,

Day2,

and Night Ringing Begin and End Times

Description:

With this programming procedure, set the begin and end times of the day 1, day 2, and night

ringing time periods. Also refer to

Section

7.2.13 for related flexible ringing assignment

programming.

Programming:

Press CONTROL T for main menu.

2. From main menu, select system and press ENTER.

3. From system menu, select system parameters and press ENTER.

4. From the system parameters menu, select day 1, day 2 or night ringing begin or end times

and press ENTER.

5. Type times in 24-hour format

(hhmrn)

and press ENTER.

6. Press ENTER (repeatedly if needed) to place cursor at next time desired setting.

7. Repeat step 5 and press ENTER.

8. Repeat steps 6 and 7 until all times are set and press ENTER.

9. When finished, press ESCAPE twice.

10. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.

Sys tern Features Programming