Programming instructions

Understanding General
Programming Information
I.0
Determining Your Equipment Needs
Program the DXP Plus digital communications system from a personal computer (PC) that meets the
following requirements:
l Intel* 80386SX-33 processor (minimum requirement),
l four megabytes of random access memory (minimum requirement),
l 3.5-inch floppy disk drive,
l hard drive with at least 80 megabytes of storage capacity,
l available g-pin or 25-pin serial data port (required for communications with DXP Plus),
l mouse that is supported by Microsoft
** Windows software (optional but highly recommended for
Microsoft* * Windows operation),
l dual-scan, active-matrix color monitor (highly recommended-VGA monochrome acceptable),
l Microsoft** Windows, version 3.11 or later,
l Microsoft** MS-DOS operating system, version 3.1 or later.
You will also need Comdial’s Visual Man Machine Interface (VMMI) programming software disk and
the operating system software disk for the DXP Plus.
* Intel Corporation,, Santa Clara, California
** Microsof Corporation, Redmond, Washington
AtoZ KELLATRONICS,INC,
4
General Programming Information 1-l