Programming instructions

lMl66-123
DXP Phs Programming Instructions
7.1.6
Call Park
Call Park Access
Description:
Access to call park enables the station user to place as many as nine calls in park zones, or
orbits, where they are retrievable by all system users.
Programming:
1 0 Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS prog.ramming menu, type item number for feature and press ENTER.
6. Press SPACE bar for feature setting.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each COS or press ESCAPE to end.
Operation:
Park call: INTERCOM ?ic 91 through % 99 (for orbits 91-99)
Pick up parked call: INTERCOM # 9 1 through # 99.
Call Park Recall
Description:
A call that is left in a park orbit longer than the length of time that you program with this feature
will automatically return to a hold recall condition at the parking station.
Programming:
1~ Press CONTROL T for main menu.
2. From main menu, select system and press ENTER.
3. From system menu, select timing and press ENTER
4. From system timing menu, type item number for feature and press ENTER.
5. Press SPACE bar for feature setting and press ENTER to accept setting.
6. When finished, press ESCAPE twice.
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
7-8 Station Features Programming