Programming instructions

IMl66-123
DXP Plus Programming instructions
7.1.6
Call Waiting (Tone)
Description:
Use this procedure to provide a station with the ability to send a tone signal to a busy called
station Also, refer to Section 7.1.10 to enable basic camp-on ability at a station.
Programming:
1 0 Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5 D From COS programming menu, type item number for feature and press ENTER.
6. Press SPACE bar for feature setting.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each COS or press ESCAPE to end.
7.1.9
Tracker Access
Description:
Assign tracker access to a particular station intercom or group of intercoms using the following
class of service (COS) programming. (The default is yes for COS 1 and COS32.) Refer to
Section 14.2 for further Tracker programming.
Programming:
1 s Press CONTROL T for main menu.
2. From main menu, select Stations and press ENTER.
3. From stations menu, select COS Programming and press ENTER.
4. From COS programming, type class (l-32) and press ENTER.
5. From COS (class number) programming, select Tracker Access.
6. Toggle the SPACE bar to select yes/no and press ESCAPE twice.
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
8. Press ESCAPE to end.
7-10 Station Features Programming