Programming instructions

/M/66-123
DXP Plus Programming Instructions
7, 1.14
Idle Line Programming
Idle Line Preference
Description:
With you enable this feature, a station automatically connects to an idle line when the user lifts
the telephone’s handset.
Programming: 1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. Fro COS programming menu, type item number for feature and press ENTER.
6. Press SPACE bar for feature setting.
7. When finished, press ESCAPE twice.
’
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each COS or press ESCAPE to end.
Idle Line Priority
Description: If you use idle line preference programming to give a station the ability to automatically
connect to an idle assigned line when the user takes the handset off-hook, take this
programming action to set the priority in which the system chooses the idle lines for use. You
can place up to eight lines in this priority list.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name and press ENTER.
5. From station programming menu, type item number for feature and press ENTER.
6. Type any eight line numbers l-240 (type as n,nn,nnn or n-nnn) and press ENTER.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each station or press ESCAPE to end.
7-l 4 Station Features Programming