Programming instructions

/M/66-123
DXP Plus Programming Instructions
7.1.17
Meet Me Answer Page
Description:
When you enable this feature at a station, its user can dial a code in response to an all-call or
zone page and meet the pager in a private conversation.
Programming:
1~ Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS programming menu, type item number for feature and press ENTER.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each COS or press ESCAPE to end.
Operation: Press INTERCOM and dial 78.
7.1.18
Message Deposit (Response Messaging)
Description:
This procedure enables a class of service messaging feature that allows station users to call an
LCD speakerphone and arrange for a message to be left on its display. The message is for the
called party to read if she or he is unable to answer the caller. Refer to Section 6.3.1 for details
about programming the LCD messages that can be deposited. Also, you can use the procedure
detailed in Section 7.3 to assign a Response Message button to the telephone; however, users
can do this for themselves if they need the button
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS programming menu, type item number for feature and press ENTER.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each COS or press ESCAPE to end.
7x19
Message Wait Originate (Message Waiting)
Description:
When you enable this feature, a station user can dial a feature code to control the message
waiting light at another station
Programming: 1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS programming menu, type item number for feature and press ENTER.
6. Press SPACE bar for feature setting.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each COS or press ESCAPE to end.
Operation:
Turn messagewaiting light on: press INTERCOM, dial f 3.
Turn messagewaiting light off: press INTERCOM, dial # 3.
7-16 Station Fea tares Programming