Programming instructions

DXP PIUS Programming /nstructions
lMl66-123
7.1.20
Music On Intercom Hold (Music Or Tone On Hold)
Description:
Programming:
With this feature enabled, the system supplies music, tone bursts or other audio information to
callers while they are on hold. The music or information source is external to the common
equipment and is customer supplied. Since the system accepts two music sources, you can use
one source for this feature and the other source for the background music feature discussed in
Section 7.1.3.
When the system supplies tone bursts to callers while they are on hold, it sounds two .l second
long tone bursts separated by a 0.1 second interval of silence. It repeats this tone burst sequence
every 5 seconds.
For intercom number,
1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS programming menu, type item number for feature and press ENTER.
6. Press SPACE bar for feature setting.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9. Repeat steps 4-8 for each COS or press ESCAPE to end.
For lines,
1 0 Press CONTROL T for main menu.
2. From main menu, select lines and press ENTER.
3. From the lines menu, select line programming and press ENTER.
4. From line programming menu, type item number for feature and press ENTER.
5. Press SPACE bar for feature setting.
6. When finished, press ESCAPE twice.
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
8. Repeat steps 4-7 for each line or press ESCAPE to end.
Station Features Programming 7-l 7