Programming instructions

DXP Plus Programming Instructions
IlW66-123
1.2
Installing The VMMI Software Program
The VMMI software is your entry to the DXP Plus system. Before you can login to the system, you
must first load the VMMI software into your PC’s memory. When installing the VMMI software, your
PC need not be connected to the DXP Plus.
1.
2.
3.
4
5.
6.
7.
8.
9.
Turn on your PC and load your Windows software.
Insert the VMMI software disk in your computer’s floppy disk drive.
From the Windows Program Manager screen, select the File pull-down menu.
From the File pull-down menu, select Run..
At the Run window, type A:install, and OK your entry.
The install window gives a default file location to receive the program; however, you can enter a
different file location if you wish. OK the default file location or your new entry.
The install window gives a default location of the VMMI software disk; however, if you have
installed the disk in a different drive enter that location. OK the default location or your new entry.
The status window appears on the screen and the program loads automatically.
When the status window shows the install to be complete, OK the install.
The Windows Program Manager screen shows the DXP Plus group icon. Select this icon and
double click your left mouse button.
10. The Windows Program Manager screen shows the VMMI icon. Select this icon and double click
your left mouse button. The computer runs the installed VMMI software program.
General Programming lnformation l-3