Programming instructions
7.1.31
Line Answer
Description:
This feature provides station access to a line for call answering purposes for an entire class of
service of stations. Also refer to
Section
7.1.32. You must turn on both that feature and this one
for a line to be fully usable.
Programming:
1.
Press CONTROL T for main menu.
2.
From main menu, select stations and press ENTER.
3.
From stations menu, select COS programming and press ENTER.
4.
Type class of service number (l-32) and press ENTER.
5.
From COS programming menu, type item number for feature and press ENTER.
6.
Press CONTROL E.
7.
Type a for add, r for remove and press ENTER.
8.
Type line port l-240 (type as n,nn,nnn or n-nnn) to be removed or added
and press ENTER.
9.
Press ESCAPE three times.
10.
Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
11. Repeat steps
4-10
for each COS or press ESCAPE to end.
7.1.32
Line Originafe
Description:
This feature provides station access to a line for call originating purposes for an entire class of
service of stations. Also refer to
Section
7.1.31.
Both that feature and this one must be turned on
for a line to be fully usable.
Programming:
1.
Press CONTROL T for main menu.
2.
From main menu, select stations and press ENTER.
3.
From stations menu, select COS programming and press ENTER.
4.
Type class of service number (l-32) and press ENTER.
5.
From COS programming menu, type item number for feature and press ENTER.
6.
Press CONTROL E.
7.
Type a for add, r for remove and press ENTER.
8.
Type line port l-240 ( n, nn,nnn or n-nnn) to be removed or added and press ENTER.
9.
Press ESCAPE three times.
10. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
11. Repeat steps 4-8 for each COS or press ESCAPE to end.
Station Features Programming
7-23