Programming instructions

lMl66-123
DXP Pius Programming Instructions
7.1.33
Periodic Line Tone
Description:
This when enabled, provides periodic warning tones to station users while they are busy on
certain lines. The warning tone consists of one 500 ms burst, a 100 ms off period, and one100
ms burst. The tone reminds the users to keep their conversations short on these lines. You can
enable this feature for a class of service of telephones and then specify the particular lines that
you deem applicable. Further, you can select how often the tone sounds. Also refer to Section
7.1.34 for a related feature.
Programming:
1 e Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select COS programming and press ENTER.
4. Type class of service number (l-32) and press ENTER.
5. From COS programming menu, type item number for feature and press ENTER.
6. Press CONTROL E.
7, Type a for add, r for remove and press ENTER.
8. Type line port l-240 (n, nn,nnn or n-nnn) to be removed or added and press ENTER.
9. Press ESCAPE three times.
10. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
11. Repeat steps 4-8 for each COS or press ESCAPE to end.
Periodic Line Tone Time
Description:
After you enable the periodic warning tones that remind users to lceep conversations short on
certain outside lines, use this procedure to set how often that you wish the periodic warning
tones to occur
Programming:
1~ Press CONTROL T for main menu.
2. From main menu, select systems and press ENTER.
3. From system menu, select timing and press ENTER.
4. From system timing menu, type item number for feature and press ENTER.
5. Press SPACE bar for feature setting and press ENTER to accept setting.
6. When finished, press ESCAPE twice.
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
7-24 Station Features Programming