User`s guide

Other Advanced Features
72 Comdial August, 03
7.4 Automatic Redial
If your station has the multiple automatic redial feature enabled, you
can place up to 10 numbers in your telephone’s redial queue.
• To use the automatic redial feature to redial a busy or
unanswered number,
1. While on the call, SELECT ARDL
OR PRESS the AUTOMATIC
REDIAL button programmed by your
installer.
2. The system repeatedly dials the num-
ber until you cancel the feature or the
system has dialed the number a pre
-
programmed number of times (deter-
mined by your system installer).
3. The AUTOMATIC REDIAL light flashes between redials and turns
on steady during redialing.
4. IF your installer has enabled answer supervision on your line, the sys-
tem automatically cancels automatic redialing and turns the AUTO-
MATIC REDIAL light off.
5. IF answer supervision is NOT enabled, SELECT ARDL OR the pro-
grammed AUTOMATIC REDIAL button while on the call to cancel
automatic redialing.
6. IF your system installer has enabled the redial multiple numbers fea-
ture, you can have up to 10 numbers in your redial queue. To add
numbers to your redial queue, REPEAT step 1 in the above procedure.
Note: The AUTOMATIC REDIAL button described in the follow-
ing steps must be programmed by your system installer or atten-
dant. Individual users DO NOT have access to programming of
this feature.
L123
CONF ARDL
Initiating Auto Redial