User`s guide

Edge 120 Digital Executive Telephone User Guide Page 53
Extension Feature Status Check FEATURE 
To find out the current condition of features on your telephone, press
FEATURE
 and review the following features:
a) LNR = empty
b) SNR = No Saved
Number
c) Memo = No Saved
Number
d) Telephone Lock = No
e) Auto Hold = No
f) Page Receive = Yes
g) Busy Ring = Yes
h) Hotline to = NULL
i) Position
j) Tenant Group
k) Pickup Group
l) Paging Group
m) Day COS = 0
n) Eve COS = 0
o) Monitor COS = 5
p) Warning Tone = No
q) Drop Call Out = No
r) Drop Call In = No
s) Intrusion Active = Yes
t) Intrusion Accept = Yes
u) Intrusion Tone = Yes
v) ECF Operation = No
w) SMDR Output = Yes
x) ICM Mode =
VC-
HF/PR/TN
Operation
1. The telephone must be idle.
2. Press FEATURE
.
3. The display shows the contents of LNR (Last Number Redial).
4. Use the right Interactive button [next] to advance through all of
the various extension features.
Extension Password FEATURE 
All extensions of the DX-120 system have an associated User
Password. Passwords are used to facilitate Phone Lock, Call Forward
Remote and Attendant features. Password length is from four to eight
characters and is determined in system programming.