Specifications

44 • Von Duprin 98/99 Series
9850WDC/9950WDC Wood door concealed vertical cable device
9850WDC/9950WDC Wood door concealed vertical cable device
9850WDC/9950WDC Concealed vertical cable device for use on single or double wood doors,
UL listed for panic exit hardware. Devices are ANSI A156.3 – 2008 Grade 1. The 9850WDC device has
a smooth mechanism case and the 9950WDC device has a grooved case. The concealed vertical cable
device is non-handed except when the following device options are used: SD (special dogging),
or SS (signal switch). See Opposite page for available outside trim and functions.
Scalp Plate – Device is furnished standard with an 15" (381 mm) long scalp plate for easy access
to cables.
Note: Do not use on pair of doors with 9975 devices.
Finishes – US3, US3A, US4, US4A, US10, US26, US26D, US26D-AM Antimicrobial, US28, 313, 315
& 643E. US15 and US32D available with 98 Series only.
Specifications
Device functions Device ships EO/DT/NL. Field selectable. For TP, K or L remove
NL drive screw from device.
Device lengths 2' 2" (610 mm) Door size (shipped less UL label)
3' 2'4' to 3' (711mm to 914 mm) Door size
4' 2'10" to 4' (864 mm to 1219 mm) Door size
Device centerline
from finished floor
39
5
/8" (1006 mm) Standard
Center case
dimensions
8" x 2
3
/4" x2
3
/8" (203mm x 70mm x 60mm)
Mechanism case
dimensions
2
1
/4" x 2
1
/4" (57mm x 57mm)
Projection Pushbar neutral – 3
13
/16" (97 mm)
Pushbar depressed – 3
1
/16" (78 mm)
Latch bolt Deadlocking top & bottom bolt. 1
1
/2" (38mm) throw
Door undercut
3
/4" (19mm) maximum
Top & bottom
Latch case
5
13
/16" x 1
1
/4" x 1
7
/16" (147mm x 32mm x 37mm)
Vertical cables
7
/32" (6mm) Diameter stainless steel cables
Fasteners & sex
bolts (SNB)
Includes screw pack for 1
3
/4" (44mm) to 2
1
/4" (57mm) thick
wood doors.
Electric options ALK Alarm exit kit
CX Chexit delayed exit
E Electric unlocking and locking trim
EL Electric latch retraction
HD-EL Electric latch retraction w/ hex dogging
QEL Quiet electric latch retraction
*
LX Latchbolt monitor switch
RX2 Double pushpad monitor switch
RX996L Trim monitor switch
RX Pushpad monitor switch
RXLC Pushpad monitor switch - low current
SS Signal switch
WP-RX Waterproof request to exit
CON Allegion Connect
Mechanical
options
GBK Glass bead kit
LBL Less bottom latch
PN Pneumatic latch retraction
SEC Security screws
SG Safety glow
SNB Sex bolts
Dogging feature Hex key dogging standard
Dogging option CD Cylinder dogging
SD Special center case dogging
LD Less dogging
DI Dogging indicator
CI Cylinder dogging indicator
Strikes Top - 249 – Unfinished, Bottom – 450 - Unfinished
ALK
Alarm exit kit
• Unauthorized
opening triggers
85-decibel horn
• Set in armed or
disarmed mode
by key
EL
Electric latch
retraction
• Enables remote
unlatching
• Alternative to
manual dogging
PN
Pneumatic latch
retraction
• For areas where
electrical devices
banned
• Special linkage
for mechanical or
pneumatic
dogging
Hex key dogging comes
standard on 9850/9950
Wood door concealed
vertical cable devices
E (E996L)
Electrified
breakaway lever
• Electried remote
locking/unlocking
• Standard in fail
safe condition
LX
Latchbolt monitor
switch
• Signals use of an
opening
• SPDT switch to
monitor latch bolt
QEL
Quiet electric
latch retraction
• Bolt retraction via
switch
• Converts exit
door to push-pull
operation
CX
Chexit delayed
exit
• Meets NFPA 101
requirements
• Self-contained
controls, locking,
alarm
RX
Pushpad monitor
switch
• Signals use of an
opening
• SPDT switch to
monitor pushpad
*For 98/9950WDC devices, LX
switch monitors trim input or
electric dogging of EL/QEL
devices. LX switch does not
monitor latchbolt condition.
CON
Allegion
Connectors
• Common
connectors to
connect various
door hardware all
the way to the
power supply
Top latch
Center
slide
249
Top strike
338
Top strike
retrofit bracket
450
Bottom strike
Bottom latch