Specifications

67
Von Duprin 98/99 Series • 67
98/99 Device options & accessories
Device options & accessories
Latch guard
12"
3' or 4'
2
1
/4"
10"
RG-27 Vertical rod and latch guard
Series RG-27 Vertical rod and latch guards protect the
bottom rods of exit devices from the damaging
impacts of carts or gurneys passing through doors. (If
bottom rods become damaged, the exit device will
not function as intended and can jeopardize the
ability to exit safely during an emergency.)
In addition to protecting the vertical rod, the guard
provides a smooth, unobstructed surface so the door
can be pushed open easily with the bumpers of a
wheelchair. The latch guard portion is 10" high. The
standard latch guard features a 45° ramp. The
extended latch guard offers a continuous ramp in 3'
or 4' widths.
All stainless steel construction in US32D finish.
Latch guards can cover latches as large as
1
1
/4"W x 10"H x 1
7
/8" projection.
Models
RGO Rod guard only (projection 1
3
/16")
RG-27 Rod and latch guard
RG-27-3 3' (914mm) Rod guard and extended latch guard
RG-27-4 4' (1219mm) Rod guard and extended latch guard
LGO Latch guard only
LGO-3 3' (914mm) Extended latch guard only
LGO-4 4' (1219mm) Extended latch guard only
When using on wood fire doors, high density block is required.
To order, specify:
1. Model number.
2. Handing (except on RGO).
3. Door material if other than hollow metal.
4. Optional sex bolt mounting available.
997 Cover plate kit
For 98/99 rim device, kit
contains inside and outside
plates for hinge stile cutouts,
an inside plate for the lock stile,
and necessary screws. Plates
are designed to cover cutouts
required by most existing exit
device installations.
Specify finish.
Rod guard
Extended latch guard
4
3
/8"
WDA Cover plate kit
For wood door applications, used to cover up
door preparations for control, also prevents the
control from boring into the wood door. Finished
to match control.
GBK Glass bead kit
Glass bead conversion kits are available for all 98/99
™
Series
devices for use on doors with raised glass beads. Each kit
consists of
1
/4" (6mm) shim sets. GBK for surface vertical rod
ships with
1
/8" shims for rod guides.
To order, specify:
1. 99GBK
2. Device type (rim, mortise, surface vertical rod, concealed
vertical rod)
3. Wood door, when used with concealed vertical Rod
4. When used with 330/350 Dummy pusher, order two hinge
stile shims.
36"
#10WDA Cover plate kit for 370
series controls
#33A-WDA Cover plate kit for 360
series controls
7
7
/8"
2
1
/16"
7
7
/
8
"
2
1
/
16
"
1
3
/4" (44mm)
9"
(229mm)