Installation guide

Creating a new trunk group 5-9
Chapter 5: Configuring Analog and Digital Trunks
Wave Global Administrator Guide
11 In the Forwarding section, specify the forwarding options to be applied to inbound calls on
this outside line:
•
When busy, forward to extension. Select the extension to which an inbound call will
be forwarded when all associated outside line buttons are busy with other calls. If you
select
None (the default), the caller will hear a busy signal.
•
When no answer after. Select the number of rings (up to 9) to wait before forwarding
an unanswered inbound call to the extension specified in the next field.
•
rings, forward to extension. Select the extension to which an unanswered inbound
call will be forwarded after the number of rings specified in the previous field. If you
select
None (the default), associated phones will ring indefinitely.
12 In the Digit Collection section, choose how many digits to dial when placing outbound
calls on this outside line:
•
Use system Call Numbering Plan. Select this option so that the system will determine
how many digits to wait for depending on the first digits dialed. For example, under
the North American Numbering Plan, if a user dials a 1, the system waits for 10 more
digits before sending the number to the central office.
•
Always collect __ digits. Select this option to require the user to enter the specified
number of digits when placing a call on the outside line.
13 In the Also Ring section, select any extension or station hunt group to be rung along with
associated digital phones on an inbound call.
14 When you are done creating or editing the trunk group, click
OK to save your changes and
close the Trunk Group dialog.
15 Click
Done to close the Trunk Groups applet and return to the Management Console.
Release 2.0
September 2010