Installation guide

Configuring site-to-site call routing for IP telephony 6-12
Chapter 6: IP Telephony Configuration
Wave Global Administrator Guide
6 On the Inbound Routing tab, configure the settings for handling calls received from this
SCP.
•
Intercept Destination. Select the extension to which calls from this SCP that cannot be
matched in the Inbound Routing table will be routed.
•
Access Profile for Tandem Calls. Select the access profile to apply to calls received
from this SCP. (Access profiles identify the different calling privileges that can be
associated with extensions, trunk groups, digital connections, and SCPs. See
“Configuring specific access profiles” on page 9-14 for more information.)
Warning: Be aware that selecting “Unrestricted” here could leave your system
vulnerable to hackers who are able to identify your Tandem Access Profile
number.
7 On the Outbound Routing tab, choose one of the Caller ID formats for sending Caller ID
with calls to this SCP.
Release 2.0
September 2010