Installation guide

Configuring SIP phones 6-26
Chapter 6: IP Telephony Configuration
Wave Global Administrator Guide
2 To configure a static IP address on a Vertical-branded 53i, 55i, or 57i SIP phone:
a Press the Options button.
b Select
Administrator Menu. When prompted, enter the admin password (the default
password is 22222.)
c Select
Network Settings > DHCP Settings.
3 Select
DHCP > Use DHCP?
4 Select No, and then press Done.
5 Select and configure the settings for the phone’s IP address, Subnet Mask, and Gateway.
Configuring the TFTP server to synchronize Vertical-branded SIP phones with
the Wave Server
This task is required. You must perform the following steps on all Vertical branded SIP phones.
Be sure to perform the steps specific to your phone model.
1 To configure the TFTP server on a Vertical-branded 9133i, 9112i, 480i, or 480i (CT) SIP
phone:
a Press the Options button.
b Select
Network Settings from the main menu. When prompted, enter the password
(the default password is 22222.)
c Select the TFTP server options, and then select
TFTP Server > Primary TFTP.
d Go to step 3.
2 To configure the TFTP server on a Vertical-branded 9133i, 9112i, 480i, or 480i (CT) SIP
phone:
a Press the Options button.
b Select
Network Settings from the main menu. When prompted, enter the password
(the default password is 22222.)
c Select the TFTP server options, and then select
TFTP Server > Primary TFTP.
Release 2.0
September 2010