Installation guide

Configuring trunk groups for inbound call routing 8-2
Chapter 8: Configuring Inbound Call Routing
Wave Global Administrator Guide
3 Select and edit a trunk group for inbound call traffic. The Trunk Group dialog opens.
4 On the In tab, specify how to interpret received digits from an inbound call:
•
Inbound Routing Table. Select this option if Wave will be receiving calls from a
central office switch. If you choose this option, refer to “Configuring inbound routing
tables” on page 8-4, for detailed instructions about setting up your inbound routing
tables. Click
Edit Inbound Routing Table to make changes to the table.
•
First Digit Table. Select this option if Wave will be receiving calls from another PBX,
rather than from a central office switch. Refer to “Configuring extension ranges” on
page 7-3, for detailed instructions about setting up the First Digit Table.
Check the
Provide Dial Tone check box if Wave must provide dial tone to the far end.
•
Use Outside Line Inbound Routing. This field is only enabled if this is an outside
line-enabled trunk group. If this option is selected, inbound calls to associated digital
phones will be terminated with no digit manipulation. See Chapter 5 for more about
creating outside line-enabled trunk groups.
Release 2.0
September 2010