Installation guide

Configuring private networking 9-36
Chapter 9: Configuring Outbound Call Routing
Wave Global Administrator Guide
Note: The Collect Digits field remains grayed out until you select a routing table from the
Routing drop-down list.
6 Select
Outbound Routing from the Routing drop-down list.
7 Select
Private Network from the Collect Digits drop-down list.
8 Click
OK to return to the First Digit Table applet.
9 If you are configuring multiple external access codes, repeat steps 5 through 8 for each.
10 Click
Done in the First Digit Table applet to save your changes and return to the
Management Console.
Release 2.0
September 2010