Installation guide

Configuring Call Park options 16-4
Chapter 16: PBX Feature Configuration
Wave Global Administrator Guide
Configuring Call Park options
The Call Park feature places a call on an extension or in a system parking slot for retrieval from
another phone.
1 In the General Settings applet, click the PBX (Advanced_ tab.
2 In the Call Park group box, specify the following call park settings:
•
Hold ___ seconds before ring back. Select the number of seconds that Wave waits for a
user to pick up a held call. If the call is not picked up within the specified time, Wave
rings the extension from which the call was held.
If you specify
unlimited seconds, Wave does not ring back the extension.
•
System park ___ seconds before ring back. Select the number of seconds that Wave
waits for a user to pick up a parked call. If the call is not picked up within the specified
time, Wave rings the extension from which the call was parked.
If you specify
unlimited seconds, Wave does not ring back the parking extension.
•
Self/Directed park ___ seconds before ring back. Select the number of seconds that Wave
waits for a user to pick up a self-parked (or directed-parked) call. If the call is not picked
up within the specified time, Wave rings the extension from which the call was parked.
If you specify
unlimited seconds, Wave does not ring back the extension.
•
Require manual line selection to answer ring back for held/parked call. This checkbox
controls what happens when you pick up the handset of a phone that has a call on hold or
a parked call on the primary line:
• If checked, the phone provides dial tone when you pick up. To connect to the
held/parked call, you must select its line manually.
• If unchecked, picking up the phone connects you to the held/parked call on the
primary line.
Release 2.0
September 2010