Installation guide

Connecting to the Wave ISM 5-9
Chapter 5: Connecting to the Wave ISM from the administrator PC
Wave Server Installation Guide
• Remote connection: A modem connection made through a trunk port on the Wave
Server. By default, the Wave modem is configured to answer on hunt group extension
570. You can use the Hunt Groups and Trunk Groups applets in the Global Administrator
Management Console to configure the Wave modem to answer on a different hunt group
extension.
Note: Modem throughput will often be much better on a digital trunk.
•
Local connection: A modem connection made through an analog station port on the
Wave Server. Although less useful than a remote connection, a local modem connection
can be made through any analog station port on the Wave Server. The default Wave
modem extension is 570.
Important: Before proceeding, install the modem on the administrator PC according to the
manufacturer’s documentation.
Note: The procedures in this section describe the steps to perform on an administrator PC
running Windows XP. The steps may be different on a PC running another Windows operating
system.
To configure the client modem on the administrator PC:
1. On the administrator PC, in the Windows Control Panel choose Network Connections >
Create a new connection
. When the New Connection Wizard starts, click Next to
continue.
2. In the Network Connection Type screen, select
Connect to the network at my workplace,
and then click
Next.
3. In the Network Connection screen, select
Dial-up connection and then click Next.
4. In the Connection Name screen, enter a
Name for the connection, for example, Wave
Modem Connection. Click
Next to continue.
5. If you have another device (besides the client modem) connected to the administrator PC,
in the Select a Device screen, select the checkbox for the modem that you added. Click
Next to continue.
6. In the Phone Number to Dial screen, enter the
Phone number:
• For a remote connection, enter the 7 or 10 digit phone number that will ring the
desired trunk.
• For a local connection, enter the extension number for the Wave modem (the default
is 570).
Click
Next to continue.
Release 2.0 Service Pack 1
April 2011