Installation guide

Connecting to the Wave ISM 5-10
Chapter 5: Connecting to the Wave ISM from the administrator PC
Wave Server Installation Guide
7. In the Connection Availability screen, specify whether this connection will be available
to all users or just to yourself. Choose
Anyone's use or My use only, depending on your
security requirements. Click
Next to continue.
8. In the final screen, click
Finish. The Connect dialog opens automatically after a few
moments. Go to the next section.
To connect to the Wave ISM via a local modem connection:
1. Select Start > Settings > Network Connections and then click the new connection (for
example, Wave Modem Connection).
2. In the Connect dialog, enter the following information, and then click
Connect.
•
User name: GlobalAdministrator
•
Password: Vertical4VoIP!
Note: Password is case-sensitive.
3. Once you have established the connection, you can do the following:
• To establish a Remote Desktop session on the Wave ISM via the modem
connection, start Remote Desktop and then enter 192.168.210.1 (the IP address of
the Wave modem) in the
Computer field.
• To start the Global Administrator on the Wave ISM via the modem connection,
point your browser to 192.168.210.1(the IP address of the Wave modem.) Then,
perform steps 5-8 on page 5-6.
Release 2.0 Service Pack 1
April 2011