Installation guide

Using the Wave Workstation Applications Setup 9-7
Chapter 9: Installing ViewPoint and Other Wave Workstation Applications
Wave Server Installation Guide
Important: If you enter a station ID of 0, when you click Next, the No Telephone Station
ID Specified dialog opens to make sure that you understand the ViewPoint functionality
limitations, and gives you the opportunity to go back and enter a valid station ID.
6. In the Setup Type dialog, select one of the following:
• Select
Typical to install the listed workstation applications in the default
location.When installing Wave for the first time, only ViewPoint is installed. When
upgrading from a previous version of Wave, Workstation Setup detects the
workstation applications that are installed, and upgrades those applications to the
current version.
Click
Next to continue. Go to step 8.
• Select
Custom to choose which workstation applications to install, including the
TAPI Service Provider, Contact Manager Assistant, and Archived Recording
Browser, or to change the installation drive or folder.
Click
Next to continue.
7. In the Custom Setup screen, you can do any of the following:
• Click a workstation application to see a description of it as well as the amount of
disk space it requires.
•Click
Space to check the available space on each hard drive on the PC.
•Click
Change to change the destination drive or folder where the selected
workstation application will be installed. You can specify a different location for
each workstation application.
• If you do not want to install one of the listed workstation applications on this PC,
click the drop-down list for the application and then select This feature will not be
available.
• To install another listed workstation application, click the drop-down list for the
application and then select This feature will be installed on local hard drive.
Click
Next to continue.
8. In the Ready to Install screen, click
Install. Installation may take several minutes.
9. When Workstation Applications Setup finishes copying files, if you are installing the
TAPI Service Provider, the TAPI Service Provider Configuration Wizard starts.
Release 2.0 Service Pack 1
April 2011