Installation guide

Workstation Setup command parameters D-5
Appendix D: Performing Unattended Workstation Installations
Wave Server Installation Guide
SUPPRESS_MSGS Integer 0 = (Default) Workstation Setup displays message boxes on the
PC where the applications are installed. Workstation Setup stops
processing and waits until someone responds to each message
box.
1 = Suppress display of message boxes. The messages are still
written to the Workstation Setup Log (see “Performing a typical
unattended installation” on page D-2.)
Use the following 4 parameters to specify the complete path to the location where a workstation application will be
installed, for example:
TVCLIENTFOLDER= /"C:\Program Files\TV Client/"
If not specified, the application will be installed in the default location.
TVCLIENTFOLDER String Location where ViewPoint will be installed.
TVTSPFOLDER String Location where the single-line TAPI Service Provider will be
installed.
TVCMAFOLDER String Location where the Contact Manager Assistant will be installed.
Optionally, use the following 4 parameters if you are installing the single-line TAPI Service
Provider ( ADD_LOCAL= TSP
or
ADD_LOCAL= ALL.) If you do not provide this information during the unattended install, you must run the TAPI
Configuration Wizard later to configure TAPI SP for the user at this PC. See “Configuring the TAPI Service Provider” on
page 9-9 for more information
TVUSER String TAPI SP only. User name of the person assigned to the station ID
in TVSTATION:
TVUSER= SRyan
Note: TVUSER must be the user assigned to the station ID in
TVSTATION, else this parameter is ignored.
TVPASSWORD String TAPI SP only. User’s Wave password:
PASSWORD= 17530
Name Value Description
Release 2.0 Service Pack 1
April 2011