Installation guide

Connecting a DSS Console 3-26
Chapter 3: Setting Up the Wave IP 500 Server
Wave Server Installation Guide
The DSS Console connects to a digital station port on any of the following modules on the Wave
IP 500:
• 12-Port Digital Station Module (VW5-12DS2-M)
• 24-Port Digital Station Module (VWU-24DS2-M)
For instructions on how to configure a DSS Console for a user, see “The Phone \ DSS Consoles
tab” in Chapter 10 in the Wave Global Administrator Guide.
To connect a DSS Console:
1. Locate an unused port on the digital station module.
2. Connect the DSS Console to the digital station port using an RJ-11 cable. The maximum
cable length between the Wave Server and the DSS Console is 1968 feet (600 m).
Note: There is no physical connection between the DSS Console and the user’s digital
phone.
Release 2.0 Service Pack 1
April 2011