Installation guide

About the Wave IP 2500 Server 4-3
Chapter 4: Setting Up the Wave IP 2500 Server
Wave Server Installation Guide
• 2 10/100 Mbps Ethernet ports (ports are mirrored and are not separately addressable). See
“About the Ethernet ports on the Wave Server” on page 4-14 for important information
about using these ports.
• 2 partial-width slots that can accommodate 2 expansion modules
• 2 full-width universal slots that can accommodate 2 expansion cards or modules
• 1 USB device port
•1 USB host port
• RJ-21X connector (with embedded FXS and FXO ports)
• Audio port for an external music-on-hold source
• 1 port for an external paging system
• V.34 Fax modem
• Status LEDs (described in detail in Appendix C)
The following diagram illustrates the system ports, LEDs, and buttons on the front of the ISC1:2
Release 2.0 Service Pack 1
April 2011