User guide

Checking a number 6-8
Chapter 6: Placing Calls in ViewPoint
Wave ViewPoint User Guide
Placing calls using other contact managers
You can place calls by using other contact managers such as Microsoft Outlook, GoldMine or
FrontOffice 2000, or Interact Commerce Corporation’s Act!. For more information, see “Using
the Wave TAPI Service Provider and Contact Manager Assistant” on page 1-2.
Checking a number
To confirm that Wave has correctly interpreted a number or address that you have entered—for
example, that it has recognized the correct country on an international call—click next to
the
Number or Address field. The Check Phone Number dialog opens. You can correct any
dialing errors here before you place the call.
Note: The Check Phone Number dialog opens automatically if the number you entered was
unclear or ambiguous.
To check a phone number
1. Under Call Using, make sure the appropriate dialing service is selected for the type of
call.
2. Under
Country/Region, make sure the correct country is selected.
3. Under
City/Area code and Local number, confirm that Wave has interpreted the number
correctly.
4. Select
Use country code and area code dialing rules if you want Wave to apply dialing
rules that determine if a number is a local or long-distance call. Clear it to have Wave dial
the number exactly as entered, as if you had dialed it on the phone.
5. Click
OK to close the Check Phone Number dialog.
Release 3.0
October 2012