User guide

Synchronizing Wave voice messages and contacts with your e-mail program 7-31
Chapter 7: Managing Voice Messages in ViewPoint
Wave ViewPoint User Guide
Configuring your Wave Mail mailbox in ViewPoint
Important: Before you can begin synchronizing your voice messages and contacts between
Wave and your e-mail program, your Wave system administrator must assign you the
appropriate permission and configure your user account to use the feature. (If the settings
described below are disabled, this has not yet occurred.) Either your Wave system administrator
or you then need to perform the following steps to configure your Wave mailbox. If you perform
these steps in ViewPoint as described below, your Wave system administrator can tell you what
information you need to enter here.
To enable Wave Mail and configure your Wave Mail mailbox
1. Choose Tools > Options. The Options dialog opens.
2. Click the Personal \ Wave Mail tab.
3. Select the
Enable voice mail and contact synchronization checkbox.
Release 3.0
October 2012