User guide

14-7
Chapter 14: Using the ViewPoint Mobile App
Wave ViewPoint User Guide
2. For Wave Server Properties, enter:
•
Address. Wave Server’s IP Address or fully-qualified domain name (for example
www.MyWaveServer.com).
• The IP Address or fully-qualified domain name entered here must be resolvable by
the DNS server to an IP address that is reachable from the network where the iOS
device is currently operating.
•
Port. Port on which Wave will communicate.
3. For Login Information, enter the same
User Name that you use to log on to ViewPoint
Desktop.
4. Select your VoiceMail Download Preferences.
•
Download Headers. Select ON to only download message headers (this will save
storage space on the iOS device), or OFF to automatically download entire new
voice messages when the App is active.
5. Select your ViewPoint Device Login Settings.
•
My Mobile Phone #. Enter the 10-digit number of the mobile device to which your
calls will be forwarded. If you are using an iPhone, enter the iPhone’s number. If
you are using an iPad or iPod Touch (which do not have voice capability), enter the
number of another phone to use (for example a cell phone).
•
Wave Station ID. Enter the station ID of your desk phone, if you want to use the
ViewPoint Mobile App to make and take calls using that desk phone. (To hear your
station ID, dial
*00 from that phone.)
6. Select whether you want to receive Push notifications for new calls and voice messages.
Note: If you change these settings, you must reconnect to the Wave Server for the
changes to take effect.
•
New Calls. Select ON or OFF.
7.
New Voice Mail Messages. Select ON or OFF.
Release 3.0
October 2012