User guide

Logging on to ViewPoint 2-11
Chapter 2: Using ViewPoint
Wave ViewPoint User Guide
To change ViewPoint login options
1. Start ViewPoint as described in the previous section. If your system logs you on
automatically, you can change the options after ViewPoint starts by choosing
File > Use a
different station
. The expanded ViewPoint Log On dialog opens:
2. In the
Use this phone with ViewPoint section, specify the phone with which ViewPoint is
associated in one of the following ways:
•
Default station ID. Select this option to use one of the following as your ViewPoint
phone. (You can select this option for a Wave phone in the office or a mobile
extension.)
•
Default station ID of your physical phone. This is typically your own phone at
your own location.
•
Your primary softphone. If you do not have a physical phone, you can use the
ViewPoint Softphone to place and take calls, using your PC’s microphone and
speakers, headset, or other USB audio devices. See “Using the ViewPoint
Softphone” on page 2-6 for an overview of the ViewPoint Softphone.
Note: A physical phone or a primary softphone is configured for you by your Wave
administrator when you are added to the system.
Release 3.0
October 2012