User guide

Logging on to ViewPoint 2-13
Chapter 2: Using ViewPoint
Wave ViewPoint User Guide
Specifying options for a remote number
If you selected
Remote number in the ViewPoint Login dialog, you can click to open the
Check Remote Number dialog to specify how Wave will actually dial the remote number that
you entered.
The number as it will be dialed after dialing rules are applied is displayed in the middle of the
dialog. This displayed dial string may be modified as you make changes as described below.
1. In the
Call Using section, select one of the following options:
•
Default Phone number access code. Select this option to dial this number using the
Default Phone number access code set up by your Wave system administrator.
•
This access code. Select this option to use a different access code. Ask your Wave
system administrator if other access codes are available for your use.
2. Select the correct
Country/Region from the drop-down list.
3. Verify that the remote
Number you entered via the ViewPoint Logon dialog is correct.
4. If the
Use country code and area code dialing rules checkbox is selected, Wave applies
the country code and area code dialing rules set up by your Wave system administrator.
For example, the area code will not be included for a local call. If this checkbox is not
selected, Wave dials the
Number exactly as you entered it.
5. Click
OK.
Release 3.0
October 2012