User's Manual

V
N
o
.
care and maintenance
CARE AND MAINTENANCE
(LA copywriter to check) Your Vertu product has been
crafted from the finest materials and care should be
taken to keep the product in optimum condition.
Ceramics and sapphire are very hard materials but are
also brittle and can be scratched by harder materials or
objects. Furthermore, they can be damaged if dropped.
Please avoid the following:
>
Contact with other hard objects and materials such
as diamond rings, nail files, sand paper, quartz
crystals, metal oxides, nitrides and carbides.
>
Dropping or knocking the product onto hard
surfaces.
>
Repeated rubbing against hard surfaces in order to
prevent degrading the outer casing where the Vertu
logo appears.
Damage caused by such treatment is not covered by the
warranty.
LEATHER
All Vertu leather products are made by expert
craftsmen. Each leather hide is unique and has its own
natural characteristics which should be considered part
of the individuality of fine leather and not as
imperfections or flaws. All leather can be damaged and
should be cared for and looked after.
Please Avoid the following:
>
Prolonged exposure to water and high humidity as
this may cause swelling.
>
Exposure to extreme temperatures as this may cause
cracking.
>
Contact with oily substances, make up and solvents.
METAL
All Vertu metals are finished to a high standard and care
needs to be taken to maintain their appearance. Vertu
precious metals have a high tarnish resistance but will
need polishing to remove finger prints. Protect in soft
cases where possible and polish only with Vertu
recommended polishing cloths.
Please avoid the following:
>
Contact with chemicals such as solvents, alkali and
acids solutions, cola based drinks and prolonged
exposure to salt water. (Wipe with a clean, soft cloth
as soon as possible if contact occurs).
>
Contact with sharp objects to avoid scratches.
>
Dropping or knocking against hard surfaces as this
may scratch or damage the metal.
THE MICROFIBRE POLISHING CLOTH
70% polyester 30% Polamide Washable
The microfibre polishing cloth is able to polish the
metal surfaces and remove fingerprints. The surface
MUST be free from dust before polishing as dust
particles may damage metal surfaces when polished.
Jewellery cleaner must not be used as this may
effect the mechanics of the product and invalidate
the warranty.