User Manual

Table Of Contents

Vertu Phone Keypad

7Language

> Insert the battery (06) bottom end first with the

release tab (07) facing up from the rear of the

phone. Ensure that the contacts on the top end of

the battery align with the contact points (08) inside

the battery compartment.

> Ensure that the battery and SIM card are seated

correctly before replacing the back cover.

> To replace the back cover, locate lugs (09)

as shown.

> Pivot the back cover into position until it clicks into

place. The cover should close tightly using only

light pressure – do not force it closed! If the cover

does not close easily, remove it and check the

battery and SIM are correctly inserted, and the

retaining bar (10) is correctly positioned and

locked.

For information about removing the battery, see

“Removing the battery” on page 19

VERTU PHONE KEYPAD

Alphanumeric keys, referred to as NUMBER keys in

this guide, are used to key in numbers or

characters, for example when making calls, storing

names in the directory or writing text messages.

Below the display are two

SELECTION keys. The

function of these keys depends on the text

displayed above them.

For example, press the

SELECTION key below

Menu to access the menu or press the SELECTION

key below

Go to to access the shortcuts menu.

When pressing keys, press them briefly and firmly,

without holding them down unless otherwise

instructed.