User Manual

• To remove the appointment pop-up, tap the screen again.
Switch between analogue and digital display
1 On the default home screen, select the clock.
2 In the Clock panel, tap the image of the clock to toggle the display between digital
and analogue format.
3 Select Exit to return to the default home screen, which now shows the clock in the
selected format.
View calendar appointments
The calendar entries for each day are indicated by arcs around the edges of the
analogue clock on the default home screen.
To view or amend the entries, tap the relevant quadrant on the clock, and then tap the
individual entries on the resultant pop-up.
Set an alarm
Alarms are set from the clock. Alarms can be repeated daily, weekly, or on workdays,
or not repeated. A number of alarms can be set.
On the default home screen, select the centre of the clock.
Once an alarm has been set, it is indicated by a red marker on the analogue clock.
1 Select New alarm, and set the time for the alarm.
2 Change the description for the alarm if appropriate, and set the alarm to be
repeated, if required.
3 Select Done.
Change an alarm
Select the alarm, and modify the settings as required.
Activate or deactivate an alarm
Select and hold the alarm, and from the pop-up menu, select the appropriate option.
This applies only to repeat alarms.
Delete an alarm
Select and hold the alarm, and from the pop-up menu, select Delete alarm.
Snooze an alarm
When an alarm sounds, you can snooze the alarm. This pauses the alarm for a defined
length of time.
When the alarm sounds, select Snooze.
Set the length of the snooze time
1 On the home screen, select the clock.
Home screen 31
© 2011 Vertu. All rights reserved.