User's Manual

Table Of Contents
2.
Open the SIM door and insert your SIM, as shown.
Note: Always remember to power off your phone before removing and inserting a SIM card. This
action will ensure that your network connectivity is restored.
3.
Close the SIM door and lock into place.
4. Replace the back cover.
Charge the phone
The internal battery needs before first use. Connect the supplied USB data cable into the charging port on
the side of the phone. Then connect the other end of the cable to the USB port on your Vertu mains
charger.
Important: Use only chargers, cables and accessories supplied by Vertu.
If the phone indicates a low charge, do the following:
1. Connect the supplied wall charger to the wall outlet and then to the micro-USB connector on your
VERTU Ti phone.
Getting started
© 2012 Vertu Corporation Limited. All rights reserved. 12