User's Manual

1. Make sure that the Bluetooth device you are going to pair with is in discoverable mode. For details,
see the user guide of the device.
2.
Touch > Settings > Bluetooth.
3.
Touch OFF and drag it to the right to turn on and scan. If Bluetooth is already on, touch SEARCH
FOR DEVICES.
4. Touch a device to connect. You may need to touch OK, or enter the device passkey to connect. For
details, see the user guide of the device.
5.
When connected the Bluetooth indicator is shown in the status bar.
Tip: Switch Bluetooth off when not in use to conserve battery power.
Warning: Obey all local laws. Always keep your hands free to operate the vehicle while driving.
Your first consideration while driving should be road safety.
Change your device name
You can change the name of your device.
1.
Touch > Settings > Bluetooth.
2.
Press Menu > Rename phone.
3. Enter new name and touch Rename.
Visible mode
To make your phone visible to other devices:
1.
Touch > Settings > Bluetooth.
2.
Touch your device name to make your phone visible for 2 minutes.
To change how long your phone is visible press Menu > Visibility timeout.
Set your phone to sync with your computer
Note: When you connect your phone for first time, your computer may prompt you that drivers are being
installed. Complete the driver installation.
1.
Connect the microUSB cable from your phone's microUSB connector to a USB connection on your
computer.
2.
From the home screen, check that appears in the status bar.
3. Drag the status bar down and touch Connected as a media device. Make sure the Media
device (MTP) or Camera (PTP) check box is ticked.
Connectivity
© 2012 Vertu Corporation Limited. All rights reserved. 59