User's Manual
Table Of Contents
- Introduction
- Safety
- Your phone
- Getting started
- Explore
- Apps
- Vertu Services
- Text entry
- Calls
- Contacts
- Messaging and email
- Music
- Maps and navigation
- Personalising your phone
- Social networks
- Managing accounts
- Browser
- Camera
- Gallery
- Office tools
- Connectivity
- Phone management
- Tips and tricks
- FAQ's
- Accessories
- Specifications
- Care of your phone
- Safety and warranty
l
Charge your VERTU Ti phone using the integrated USB cable (up to one full charge).
l
Charge a compatible accessory, such as a Vertu Bluetooth headset, using the auxiliary USB power
output (up to one full charge).
l
Recharge your Vertu Portable Power pack.
Charge your VERTU portable power
1. Connect the USB cable provided between the charging port on the base of your Vertu Portable
Power pack and your power source (this can be the Vertu charger (AC-31) supplied with your
phone, or a compatible computer). When charging begins, successive charging indicator lights are
illuminated. Once all five lights are illuminated, your Vertu Portable Power pack is fully charged.
2. Disconnect your Vertu Portable Power pack from the power source.
Your Vertu Portable Power pack switches off automatically if no charging takes place for 10 seconds, or if it
automatically becomes discharged.
Use Vertu Portable Power to charge your VERTU Ti phone
1. To switch on your Vertu Portable Power pack, press and hold the Power button until the charging
indicator lights are illuminated.
2. Using the cable management lever, release the integrated USB cable.
3. Connect the USB cable to the microUSB connector on your VERTU Ti phone.
4. When charging is complete, disconnect your phone from the pack and re-house the cable.
To ensure optimum signal performance of your VERTU Ti phone, do not place your Vertu Portable Power
pack against your phone during calls.
Accessories
© 2012 Vertu Corporation Limited. All rights reserved. 70










