User's Manual

Table Of Contents
Use Vertu Portable Power to charge a compatible accessory
1. Switch on your Vertu Portable Power. Press and hold the Power button until the charging indicator
lights are illuminated.
2. Connect the cable supplied with your accessory to the auxiliary USB power output on your Vertu
Portable Power pack.
3. When charging is complete, disconnect the accessory from the Vertu Portable Power pack.
In the unlikely event that the connected accessories draw excessive power from your Vertu Portable Power
pack, charging is suspended and the indicator lights flash. Disconnect the accessories and press the
Power button to reset your Vertu Portable Power pack.
Note: The surface of this device does not contain nickel in the platings. The surface of this device contains
stainless steel.
Wired stereo headset
Your VERTU Ti phone is supplied with a wired stereo headset, which includes a microphone. Connect this
to the headset connector of your VERTU Ti phone.
All the volume and music controls, and call handling functions, are contained within your VERTU Ti phone.
If you use the headset with a device other than your VERTU Ti phone, the 3.5 mm adaptor (supplied) may
be required.
Accessories
© 2012 Vertu Corporation Limited. All rights reserved. 71