VERTU SP-1V BLUETOOTH TRAVEL SPEAKER USER GUIDE VERSION 1.
ii
TABLE OF CONTENTS English ....................................................................................................................................................................................... 1 Français ...................................................................................................................................................................................23 Deutsch .....................................................................................................
Tiế ng Việ t ........................................................................................................................................................................... 157 Bahasa Indonesia ................................................................................................................................................................. 179 Español.....................................................................................................................................
VERTU SP-1V BLUETOOTH TRAVEL SPEAKE R Thank you for purchasing the Vertu SP-1V Bluetooth travel speaker. The SP-1V speaker allows you to enjoy your media and make conference calls wirelessly over Bluetooth. You can use the SP-1V speaker with all Vertu phones and devices that are Bluetooth enabled and have the right specifications. For details, see Specifications on page 16.
PACKAGE CONTENTS • Bluetooth travel speaker • Wall charger AC-32V with regional plugs • Micro USB cable 1200 mm (CA-225DV) • Audio cable with 3.5 mm to 3.
BLUETOOTH TRAVE L SPEAKER 1 1 Answer or reject a call 2 Volume down 3 Volume up 4 Enter or exit Bluetooth pairing mode 2 3 4 English 3
BLUETOOTH TRAVE L SPEAKER 4 1 Micro USB port 2 3.
LED STATUS I NDI CATO R Colour of the light Speaker status Flashing white Switched on Flashing blue In Bluetooth pairing mode Flashing green Charging Constant green Fully charged Constant red Power is low 1 LED status indicator 1 English 5
CHARGI NG THE BLUETOOTH TRAVEL SPEAKE R 1 6 2 English
CHARGI NG THE BLUETOOTH TRAVEL SPEAKER • Fully charge the speaker before you use it for the first time. • Use the supplied AC-32V charger. • Fully charge the speaker every six months, even if you don’ t use it. You can use the speaker while it charges. The speaker might charge more slowly while in use. CONNEC TI NG THE SPEAKER TO YOUR DEVI CE WI TH BLUETOOTH When you switch on the speaker for the first time, it automatically enters pairing mode.
MANUAL PAI RI NG 1 Bluetooth pairing button 1. Press and hold the Bluetooth pairing button for 2 seconds. 2. There is a sound and the LED indicator flashes blue. 3. Enable Bluetooth on your device. 4. From your device, add or search for devices. 5. From the list, select Vertu SP-1V. 6. If you are asked for a pass code, enter 0000.
SI MPLE SECURE PAI RI NG WITH NFC 1 To use simple secure pairing, your device must be NFC-enabled. 1 NFC area • Put your NFC-enabled device over the NFC area. The SP-1V speaker powers up when it detects your device. The LED indicator flashes white and then flashes blue. When the indicator flashes blue, the speaker and the device are connected.
CONNEC TI NG THE SPEAKE R TO YOUR DEVI CE WI TH THE AUDI O CABLE 1 10 2 English
LISTENI NG TO MUSI C I NCOMI NG CALL S 1. Connect the speaker to your device. If you are connected to your phone, incoming calls and messages take priority over media. You hear your ringtone through the speaker. 2. Navigate to the media player on your device and play your music. For best results: • Set the volume on your device to maximum and adjust • Note: If your phone does not support the ringtone transfer feature, the speaker uses its own default ring tone. the volume on the speaker.
MAKI NG HANDS-FREE AND CONFERE NCE CA L L S If you can make hands-free and conference calls with your phone, then you can make them with the SP-1V speaker. You can answer and reject calls with your phone, or with the call button on the speaker.
DI ALLI NG WI TH THE SPEAKER • If your phone supports voice dialling with Bluetooth, press the Some phones might play the call through the phone. You might need to select the speaker as the audio device for hands-free calls. call button to activate voice dialling mode. ANSWERI NG CALLS WI TH THE SPEAKER 1. Press the call button on the speaker. REJ ECTI NG CALL S WI TH THE SPEAKE R • Press and hold the call button for about 2.5 seconds, until the call is rejected.
TROUBLESHOOTI NG Sound is distorted Unable to connect the speaker to my device with Bluetooth • Reduce the volume on the speaker. If the speaker volume is • Check that no other Bluetooth devices are connected to the speaker. • Check that your device is Bluetooth compatible and that Bluetooth is switched on. Unable to connect the speaker to my device with NFC • 14 Check that your device is NFC enabled and that NFC is switched on. English at the lowest setting, reduce the volume on the device.
No sound or too quiet The speaker turned itself off • On the Bluetooth setting menu of your device, check that your • Turn the speaker on. On the Bluetooth setting menu of your device is connected to the speaker. device, check that your device is connected to the speaker. Check that the speaker is not in pairing mode. The LED indicator flashes blue when the speaker is in pairing mode. If the speaker does not receive a signal for 15 minutes, it powers off automatically.
SPECI FI CATI ONS Bluetooth Audio • Wireless Range: 10 m minimum point to point line of sight • Power rating nominal 5 W, maximum 8 W per channel • Built-in microphone x1 • Frequency Response: 60 Hz - 35 kHz • Maximum output power 6 Watts x2 • Support 3.5 mm line-in using Northern American standard • Approximately 16 hours of continuous play measured at 1 Watt over Bluetooth. Varies by volume level and audio content.
SUPPORTE D BLUETOOTH PROFILES DI MENSI ONS • Advanced Audio Distribution Profile (A2DP) 1.2 190 mm W x 60 mm D x 61 mm H • Hands-Free Profile (HFP) 1.6 • Headset Profile (HSP) 1.2 • Audio Video Remote Control Profile (AVRCP) 1.5 SPEAKER MEMORY The speaker remembers up to 8 paired devices. If you pair a ninth device, the speaker deletes the device that you used least recently.
CARI NG FOR THE COMPONENTS OF YOUR SP-1V TRAVEL SPEAKE R Do: Do not: • Keep all components dry and free of dust and dirt. • Use or store the components in hot or cold places. • Clean the components with a soft cloth. • Drop, knock or shake the components. • Use harsh or abrasive chemicals, cleaning solvents or strong detergents to clean the components. • Paint the components. If you think that the speaker is not working correctly, take it to your nearest Vertu authorised service facility.
NI CKEL EXPORT CONTROL S The surface of this product is nickel-free. Your Vertu Bluetooth travel speaker (SP-1V) may contain commodities, technology, or software exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law is prohibited. RoHS STATEMENT This Product does not contain any of the substances, listed in accordance with EU RoHS (Restriction of Hazardous Substances) Directive 2011/65/EU.
DECLARATI O N OF CONFOR MI TY We, Vertu, declare, under our sole responsibility, that the product, Bluetooth travel speaker, type SP-1V and the USB Wall Charger, type AC-32V are in conformity with the provision of Council Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.vertu.com. 20 English EU RECYCLI NG NOTI CE Vertu complies with European Community requirements for the recycling of Waste Electrical & Electronic Equipment (WEEE).
This symbol indicates that the Product was put onto the market after the WEEE legislation was implemented, and that the consumer should not dispose of the Product as normal household waste or unsorted municipal waste, but that it should be appropriately recycled. If you want Vertu to recycle your Product at the end of its life, please either return it to the point from which you purchased it (if known), or return it to Vertu’ s headquarters.
FCC COMPLIANC E STATEMENT Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
WARRANTY The warranty period Vertu provides for this product is 12 months. For details please visit the local Vertu online warranty text web site www.vertu.com Copyright © 2014 Vertu Corporation Ltd. All rights reserved. Vertu and the V logo are registered trademarks. Vertu operates a policy of continuous development. Therefore, Vertu reserves the right to make changes and improvements to any of the products described in this document without prior notice. Refer to www.vertu.
ةي بر عال
