User's Guide

Table Of Contents
4. If you want to insert a microSD memory card or another nanoSIM card, place it in the second
compartment of the SIM tray. Ensure the metal contact is facing down.
5. Carefully insert the SIM tray into your phone until it clicks into place.
Tip: If you insert two nanoSIM cards into your phone, you can choose how to use them. For
example, you can use SIM1 for calls and messaging, and SIM2 for mobile data. To choose
settings for your nanoSIM cards, touch Apps> Settings>SIM settings.
Charge the phone
The internal battery needs activating prior to first use, and it is recommended to charge the battery at this
point as it may not have been supplied with a full charge. Connect the supplied USB data cable into the
charging port at the bottom of the phone. Then connect the other end of the cable to the USB port on your
Vertu mains charger.
!
Important: Use only chargers, cables and accessories supplied by Vertu.
If the phone indicates a low charge, do the following:
1.
Connect the supplied wall charger to the wall outlet and then insert the USB connector into your
phone.
2. When the battery is fully charged, disconnect the charger from the phone and then from the wall
outlet.
Note:
l You can use the phone while it is charging.
l If the battery is completely discharged, it may take several minutes before the charging indicator is
displayed or before you can make any calls.
l The phone cannot be activated using the Vertu Wireless Charging Pad.
Getting started
© 2017 Vertu Corporation Limited. All rights reserved. 11