Measurement Guide

6-inch clearance (minimum)
between top of door frame
and ceiling/crown molding
Mount header board
83
3/4-inches from floor up
This will allow for a
1/2-inch
clearance between bottom
of door and floor
6” Clearance
(minimum)
Crown molding, or ceiling
Header board (4” height)
+1” above and below
Top of doorway
molding (or opening,
if there is no molding)
1 doorway width (minimum)
clearance recommended
on either left or right side
SIDE VIEW
FRONT VIEW
Crown molding
Door frame
Header board
IS YOUR SPACE RIGHT
FOR THIS DOOR?