Instructions / Assembly

MOUNT THE HEADER BOARD
5. Find the two areas with a stud along your marked line past the
opening. X
marks the spot! The other 3 wood screws will be used
above the opening where you will be drilling into solid wood.
6. Grab your DIY partner for this next part. Lift the header board, and
line up the bottom of your board with your horizontal marked line.
7. It’s power tool time! Drill a wood screw through the header board
above the track into the two marked stud locations and position 3
above the doorway. Keep using the level to ensure the board
doesn’t slip off level.
8. Apply screw head covers to cover the screw holes on the
header board.
+
x
x
xx x x x
8
7 6
555
Your header board &
track are now secured.
Look at you go!
We are so proud.
Get your
Stud Finder ready!