User's Manual

-18-
10.3.6 Dedicated key
Set the navigation keys’ function in standby mode. Select the dedicated navigation key, such
as “Down”, press middle key to access shortcuts list, and then select the preferred one. By the
same way, set the “Up”, “Left”, “Right”.
10.3.7 Flight mode
After setting the flight mode, you need not power off the phone on the plane, at the same
time cannot make a call.
10.3.8 UART settings
Select SIM card 1 or SIM card 2, the settings used to determine the current uart port which
accepts AT is used by SIM 1 or SIM 2.
10.3.9 Misc. settings
Set LCD backlight.
10.4 Network settings
Set the network selection mode. Select “SIM1 network setup” or “SIM2 network setup”.
 Network selection
 New Research: search new network.
 Select network: search new network, and show the network list.
 Selection Mode: set “Automatic” or “Manual”.
 Preferred networks: set the preferred network.
10.5 Security settings
The menu allows encrypting with some phone functions. It can avoid your phone or SIM card
misused. When you input password, the password will be shown with “*”. If input wrong number,
press end key to clean. You can change PIN1, PIN2, or phone lock password and so on.
10.5.1 SIM1 security
10.5.1.1 PIN lock
If activate PIN lock, before you use SIM1 card, you need input correct PIN.
10.5.1.2 Change PIN/PIN2
The menu can change SIM1 card PIN, PIN2 password. After input correct password, enter
new password for two times.
10.5.2 SIM2 security
Please refer to “SIM1 security”.
10.5.3 Phone security
10.5.3.1 Phone lock
If activate Phone lock, before you use phone, you need input correct phone password.
10.5.3.2 Change password
Change phone password.