User's Manual

2. Insert the SIM card, with the notch at the lower right and the gold

contacts face down, into the card slot.

3. Replace the battery and close the cover tightly.

Note:

 If the SIM Card is installed improperly or damaged, the prompt words

“Insert SIM” will display on the screen after you switch on your phone.

Remove the SIM Card and check the way that performs as pictures

show, and then mount it again.

 If “Insert SIM” still appears on the screen after you have inserted the

SIM correctly, there may be something wrong with your SIM card.

Please ask the network operator to repair it.

 If the screen displays that the SIM card is locked permanently, please

consult with your network provider.

Mounting the T-Flash Card

Please follow steps described as below:

1. Open the rubber cap from the memory card slot, and then insert the

T-Flash memory card into the slot until snaps into the place completely.

2. To remove the card, press the card gently then the card will pop up

automatically.

Charging the Battery

Note: Please always keep your phone connector and charger dry.

1. Connect the travel adapter to the phone.

2. Plug the travel adapter into a proper AC wall outlet.

3. When your phone indicates that the battery is fully charged, please pull

the travel adapter out from the I/O socket of the phone.

Tip: 1. If the battery is totally empty or low, it may take a few minutes before the

charging indicator appears on the screen.

2. You can turn on/off, and use the phone while charging.

Warning: Make sure that the standard voltage/power of the place where you

charge the battery matches with the rated voltage/power of our travel adapter.