User's Manual
Table Of Contents
- 슬라이드 번호 1
- 슬라이드 번호 2
- 슬라이드 번호 3
- FCC STATEMENT
- FCC STATEMENT
- Safety Information (1)
- Safety Information (2)
- 1. Product Information
- 슬라이드 번호 9
- 슬라이드 번호 10
- 슬라이드 번호 11
- 슬라이드 번호 12
- 슬라이드 번호 13
- 슬라이드 번호 14
- 2. VST Gateway and Smart I/O Installation Method
- 슬라이드 번호 16
- 슬라이드 번호 17
- 슬라이드 번호 18
- 슬라이드 번호 19
- 슬라이드 번호 20
- 슬라이드 번호 21
- 슬라이드 번호 22
- 슬라이드 번호 23
- 3-1. Android OS Application Wired Registration
- 3-2. Android OS Application Wireless Registration
- 슬라이드 번호 26
- 슬라이드 번호 27
- 4-1. iOS Application Wired Registration
- 4-1. iOS Application Wired Registration
- 4-2. iOS Application Wireless Registration
- 4-2. iOS Application Wireless Registration
- 5. Detailed description of APP
- 5. Detailed description of APP
- 5. Detailed description of APP
- 5. Detailed description of APP
- 6. Managing Installer Web Pages
- 6. Managing Installer Web Pages
- 7. Trouble Shootings
- 7. Trouble Shootings
- 8. Product Specifications
- 9. Limited Warranty VESTA.DS.Inc
2-1. Setting Smart I/O Mode
No. Description
The power LED of Smart I / O flashes red every second.
(*Smart I / O should be connected to the DC12V and RS-485
port on the PCB assembly.)
Press S/W1 button for 10 seconds to enter the pairing mode.
(*Pairing mode is the step to link between Smart I / O and
VST Gateway.)
When you enter the pairing mode by pressing button 1 for
10 seconds, the LEDs Ⅰ and Ⅱ blink green at the same time.
(*If Smart I / O enters the pairing mode normally, it should
connect with VST Gateway. ) (Refer to the next page.)
<Front Side>
<Side Section>
▶ After completing the installation of Smart I/O as above, execute the following three modes of Smart I/O in order.
<16>