- VESTAX CORPORATION OWNER'S MANUAL CD Player CDX-15

6
CD SECTION
①CUE BUTTON
The last pause position is always memorised and can
be called up by pressing cue button. This function is
useful for instant cueing, the same position can be
recalled and played back with a single quick action.
■Memory of the cue point will be lost or
reset when any of the following operations
are done.
[1] Power is turned off.
[2]The CD is paused and played another
position. This position will then be
memorised as the new cue point.
[3]The STOP button is pressed.
[4]The CD cover is opened.
②PLAY/PAUSE BUTTON
This button is used to start and pause the CD. When
the CD is left in pause mode for more than ten
minutes, the CD mechanism is automatically set to
STANDBY MODE and the CD stops spinning.
When the PLAY/PAUSE button is pressed in
STANDBY MODE, the CD mechanism is reset to
PAUSE mode at the last CUE point if the cue point
has been set previously, or at the starting position of
the first song if the cue point has not been set.
④PITCH ADJUSTMENT FADER
Used to adjust the play back pitch (speed) by +/-10%
to match the tempo of the music.
When the CDX-15 is set to PAUSE with
monitor mode on, it generates the loop sound
between the paused position and four frames
before the paused position.
NOTE
9
6
27
4
5
3
10
8
1
11
CDX-15/E 00.9.12 7:43 PM ページ 6