OWNER'S MANUAL This owner's manual for CDX-35, CDX-35C and CDX-35P. VESTAX CORPORATION 1-18-6 Wakabayashi, Setagaya-ku, Tokyo 154-0023 Japan Phone:03-3412-7011 Fax: 03-3412-7013 VESTAX America 2750C 29th Ave Suite. 115 Hollywood. Fl33020 Phone:303-766-5269 Fax: 303-766-2196 VESTAX (Europe)Ltd.
CONGRATULATIONS ! Thank You for purchasing the VESTAX CDX-35, CD PLAYER. Please read this owner's manual carefully before you start to use, so that you will fully understand all of the special features and enjoy the full use of the product.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequeney energy and, If not installed and used in accordance with the lnstructions, may cause harmful interference to radio communications.
IMPORTANT SAFEGUARDS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain instructions-The safety and operating instructions should be retained for future reference. 3.
to its normal operation. e. If the product has been dropped or cabinet has been damaged. f. When the product exhibits a distinct change in perfromance-this indicates need for service. 19. Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characterristics as the original parts. Unauthorized substitutions may result in fire, electric shock or other hazards. 20.
BEFORE USE Notes on the Compact Disc (CD) The surface which is glossy like a ralnbow is the front side of the CD, and the surface where the label information is printed is the back side. Unlike conventional analog disk turntables, the CD player reads information from the disc by applying laser beam, in place of a stylus, on the front surface. Consequently, the performance of CD discs will not degrade after repeated use like conventional analog disks.
CONTROL AND FUNCTION CONTROLLER UNIT PLAYER UNIT 12 6
CONTROLLER UNIT 5 12 17 18 19 16 22 23 6 24 21 20 8 27 7 26 11 25 10 13 14 9 15 4 3 1 2 7
next track. The number of tracks skipped ahead. ① PLAY/PAUSE KEY Each press of the PLAY/PAUSE button cause the operation to change from play to pause or from pause ⑧ PREVIOUS KEY Used for skipping backwards to the starting point of to play. the current track(one press). Pressing twice returns to the starting point of the previous track. Pressing ② CUE KEY additional times will return to the corresponding Pressing cue button returns the CD to the last set previous track. "CUE" point and pauses it.
21 OPEN/CLOSE ⃝ ⑬ LOOP START Press to load or eject the disc. Each press will open or Used for setting a start loop point and new cue close the disc tray on the transport. Tray will not point during play. open unless the disc has been paused. ⑭ LOOP END 22 PLAYER SELECT SWITCH Used for setting the end loop point and and ⃝ The switch for select main player. releasing loop action. 23 ⃝ SUB CUE Cue switch for second player unit. ⑮ RELOOP/EXIT This button is for cancel and return loop play .
DISPLAY A MAIN PLAYER Shows the player (A or B) that the unit is selected. G REVERSE Lights when the REVERSE function is used. B TRACK Shows the track that the unit is playing. H REPEAT Lights when repeat function is used. Shows present repeat mode (repeat1/repeat all) C TIME (MIN/SEC/FRM) Shows the minutes/seconds/frames elapsed or I CUE MEMO 1,2,3 remaining depending on mode settings. Lights when cue point is memorized in memory.
[1] TIME MODE Shows the time information of disc. In this mode, RING DISPLAY is working together time counter (TIME DISPLAY ). 1. TRACK REMAIN TIME 2. TRACK PLAYING TIME 3. TOTAL REMAIN TIME [2] DISK OPERATION MODE Shows the operation of disc. In this mode, RING DISPLAY rotates in various speed and direction. Speed is changed by playback speed. During normal playback, RING DISPLAY rotates clockwise. When REVERSE mode is on, rotates counterclockwise.
PLAYER UNIT ●FRONT PANEL SECTION 29 28 30 31 32 33 34 35 3637 28 POWER SWITCH ⃝ Turn on and turn off the machine from this button. The unit should always be shut down with this button first before any external power is removed. 29 DISK TRAY ⃝ Place your CD in here. 30 LINK/TRACK DISPLAY ⃝ Connecting with controller, display shows setting of player (A or B). Without controller, shows track number. ⃝ 31 OPEN/CLOSE KEY Press to load or eject disc.
●REAR PANEL SECTION 42 40 CD OUT R CD B L VESTAX CORPORATION MODEL NO.CDX-35 CLASS1 LASER PRODUCT KLASSE1 LASER PRODUCT I.H.T. IEC825 230V∼ 50Hz 18W CAUTION：SHOCK HAZARD, DO NOT REMOVE SCREWS. CONTROLLER MAX 5V 0.5A MADE IN JAPAN FABRIQUE AU JAPON DE CHOC ELECTRIQUE, ATTENTION：RISQUE NEPAS ENLEVER VIS. OPEN/ CLOSE SERIAL NO. ON OFF 39 38 41 ⃝ 38 CONTROLLER CONNECTOR Plug your control cables for control unit. 39 PLAYER CONNECTOR ⃝ Plug your control cable for second player unit.
TECHNIQUES FOR DJ PLAY CUEING OPERATIONS (setting a cue point) [1] USE PAUSE MONITOR FUNCTION PAUSE ① ①During playback, when the disc comes to the “PLAY/PAUSE” point you wish to cue, press the PLAY/PAUSE and MONITOR button to enter monitor mode. CUE POINT direction of play back ② ②Adjust the length of monitoring sound (0.039s ~ 3.0 s). “MONITOR” adjust the length of monitoring sound ③ ③Rotate the search dial to search for desired location.
[2] USE THE SEARCH DIAL ① ①During playback, press the PLAY/PAUSE PAUSE button. PLAY/PAUSE CUE POINT direction of play back ②Rotate the jog dial to search for desired ②③ A B B A ④⑤ location. (Playback speed is changing from 0% to +/- 300% by rotating speed.) ③To set the cue point while listening to the sound, using the search dial to return the disc to a point just before the point at which you wish to begin playback from the cue.(The sound heard in the audible pause mode is the cue point.
CUE POINT MEMORY One player of CDX - 35 can memorize 3 cue points. [1] Setting the cue point memory ①② ①Set the cue point. (See the " cueing operation") ②Press the "MEMO" button. The " 1 2 3 " indicator lights on and off. 1 2 3 ③Select any memory bank, and press bank ③④ button.(EX : BANK 1) ④The bank indicator lights. (EX: BANK 1) The cue point has been stored in memory bank. [2] Recall the cue point memory ①Press the bank button (The cue point is already set.
LOOP PLAY [1] DESIGNATE A LOOP ①② ①Press the PLAY /PAUSE button to begin playback. set loop-in point ②Press the "START" button at the desired loop in point. S The START button lights, and the END ,RELOOP/EXIT button lights on and off. direction of playback ③④ MAXIMUM 20 second S E set loop out point ③As playback continues, press the "END" button at the loop out point. The END button lights. ④Loop play begins automatically (between the loop-in and loop-out points).
MASTERTEMPO Press the MASTER TEMPO button. The MASTER TEMPO indicator lights. PITCH INDICATER Shows position of memorized tempo by LED. Please refer to following example. 1 ⃝ 2 ⃝ PLAYSELECT 3 ⃝ 4 ⃝ Change to the B side. Change PLAYERSELECT SW from A to B Adjust the tempo （ex.tempo：-6％） Adjust the tempo （ex. player A） （ex.tempo：0％） （ex. player B） 5 ⃝ 6 ⃝ Change to the Aside.
CONNECTION One Player and One Controller Player CDX-35P CONTROLLER Controller CDX-35C Two Player and Controller Player CDX-35P CD, B CONTROLLER CONTROLLER Controller CDX-35C Player CDX-35P Connection for another EQUIPMENTS CONTROLLER CD OUT CD, B Controller CDX-35C CONTROLLER CD OUT LINE 1, 2 LINE 4, 5 INPUT MASTER OUT MAIN SPERKER MAIN SPERKER Power amplifier [Vestax PT-X1000A] CHANNEL A MINI MAX CHANNEL B MINI MAX Sperker cable PROTECT B.T.
SPECIFICATION Total Power requirement 115V/230VAC, 18W Weigth 0.8kg(Controller), 2.4kg(Player) Demensions (WxHxD)mm 210x49x165(Controller) 190x82x257(Player) Attachments Owner's manual (CDX-35, CDX-35C, CDX-35P) Connector cable (CDX-35, CDX-35P) Quantization 16bit linear Sampling Frequency 44.1kHz Digital Filter 8times over sampling Shock Proof Memory 16Mbit,10sec Error Correcting System CIRC Harmonic Distortion Less than 0.
Vestax Corporation 443 S 851250
